wiki:Flashing/Linksys/FactoryWebInterface
Last modified 4 years ago Last modified on 08/20/2013 08:34:28 PM

Flashing over factory default webinterface

To flash Linksys router you need to browse to default IP: http://192.168.1.1/

Where you login using default username and password

  • username: root
  • password: admin

You should se screen like this:

Click on Administration and then Firmware Upgrade:

Select your firmware (.bin) and click Upgrade. This will start flashing:

DO NOT turn power off or disconect router while flashing it may case demage. If flashing was successful you should se this kind of message:

Now you can close browser but leave router to finish flashing. It will reboot automaticly then boot to wlan slovenija node. Durning flashing it may pulsate POWER LED and DMZ LED may be ON. When the WLAN LED powers on means that router transmitting wlan slovenija network.

Attachments